Dantherm RCV320 P1 Übersetzung Der Originalanleitung Seite 35

INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
Installation: Access to the main PCB
Fig. 27: Turning the control unit
Option 3
1.
Fig. 28: Removing the front cover
2.
Ö The main PCB detaches from the control unit.
Fig. 29: Detaching the main PCB
3.
Fig. 30: Removing the main PCB
2. Turn the cabinet over to gain access to the main PCB.
Loosen the three screws on the bottom of the unit and remove the front cover.
A pin/lock is located behind the control unit that holds the main PCB in place. Press the
pin/lock (1).
b b
Remove the main PCB from the control unit.
a a
1
35