Dantherm RCV320 P1 Übersetzung Der Originalanleitung Seite 16

16
4. Insert the clean filters into the unit. Ensure that the filters are inserted the right way
round.
The arrows on the filter must point in the direction shown here.
Fig. 3: Checking the filter for correct installation direction
5. Press the button for 5 seconds.
Ö The filter alarm is stopped and the filter alarm timer is reset.
Ö A brief acoustic signal will be emitted indicating that the filter alarm timer has been reset
correctly.
Fig. 4: Stopping the filter alarm
USER MANUAL: Maintenance and care