Hendi 224328 Gebrauchsanweisung Seite 11

FUNCTIONING DESCRIPTION
The control devices are designed and manufactured
so as much sure and reliable and resistant to the
service normal stresses, to the foreseeable strains
TYPE/ COLOR REFERENCE / DESCRIPTION
Button / black "
Key / black "
224335, 224359, 224380)
Key / black "
224335, 224359, 224380)
Key / black "
Key / black "
Display / red Speed visualization: from 1 to 9 / maximum speed visualization
(only models HENDI: 224335, 224359, 224380)
STARTING
The machine starting with impulse is possible only with a voluntary action on the control device foreseen
for this aim:
Model HENDI: 224328: „
Models HENDI: 224335, 224359, 224380: „
STOP
For the stop control push the button
FUNCTIONING SAFETY
If the machine is under stress, or is submitted to too
long functioning times or submitted at overloaded,
the same stops immediately for the thermal protection
" / Button for the machine starting control with maintained action
" / Max speed switching button only for blender tool (only models HENDI:
" / Key for speed increase / safety key for starting (only models HENDI:
" / Key for speed reduction (only models HENDI: 224335, 224359, 224380)
" / Key for the machine starting safety (only models HENDI: 224335, 224359, 224380)
" only use with maintained action
" + „
.
and to the external agents. Besides they are clearly
visible, locatable and marked from a suitable marking.
Here follow the main control devices are showed:
". Only use with continued action.
functioning. In this case wait that it is completely
cooled before proceeding to the starting function.
EN
11