Chap. 5. Maintenance, Breaks Research And Cleaning - Hendi 224328 Gebrauchsanweisung

CHAP. 5. MAINTENANCE, BREAKS RESEARCH AND CLEANING

MAINTENANCE PRESCRIPTIONS
INSULATION FROM THE EXTERNAL FEEDING SOURCES
Before to perform any operation of maintenance, cleaning and parts change, the external feeding sources
must be sectioned and insulated.
Position on "zero" the protection device placed
upstream of the electric equipment feeding line.
BREAKS OR DAMAGES RESEARCH AND MOVING ELEMENTS UNBLOCKING
Here follow are indicate the interventions for the breaks or damages research and moving elements
unblocking which can be performed from maintenance men.
EN
TYPE
Net voltage
lacking
Functioning
intervention
The machine doesn't
function: the blades
don't rotate or don't
perform correctly
the cutting
14
POTENTIAL/S CAUSE/S
General Blackout
Fuses or magneto thermals
intervention place upstream of
the machine feeding line
Protection device intervention
inside the machine
Cause/s not identifiable
Feeding voltage lacking
Sectioning devices set on "OFF"
Lacked running button
functioning
Thermal intervention due to
the overheating
Visualization on the display of
the letter "E"
Disconnect the general sectioning device and
provide to protect the plug with proper systems.
MODALITY AND COMPARISON
Contact the electric energy distributor
After having eliminated the causes that have
determined the protection device intervention,
restore it. In case of problem persistency
contact an electrician technician.
Contact an electrician technician: after having
eliminated the causes that have determined the
protection device intervention, restore it.
Contact directly the Authorized Assistance
Center
Check and restore the electric energy
Connect the plug on the feeding socket
Check the button efficiency and eventually
contact directly the Authorized Assistance
Center
Wait the complete cooling before to machine
restarting
Speed reader damaged, contact directly
the Authorized Assistance Center