Parkside PDSA 20-Li C2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 19

It is necessary to provide
the appropriate training in
safe operation .
Do not use the product
while tired, ill or under
the influence of alcohol,
drugs or medicaments .
Always carry out a visual
inspection before using
the product . Do not
use the product if it is
damaged . If the product
is damaged, have it
checked by qualified
personnel .
Always check the product
for leaks . If any are found,
correct them before using
the product .
When assembling or
removing accessories, do
not point them towards
yourself or other persons .
The product must only
be operated by 1 person
at a time . Nobody else
must be within a radius
of 15 metres at the same
time .
If there is no spray
coming out from the
nozzle or the spray
amount is decreased, the
hose and spray system
may be blocked . Rinse
16 GB
and clean all parts of the
hose and spray system
with clean water .
After the product has
been stored for a long
time (e .g . during winter),
fill the spray tank with
clean water . Carry out
a test run to check if
there are any leakages or
cracks .
Release the residual
pressure in the spray
tank after each use
and especially before
removing the spray tank
cover . Do so by pressing
the trigger .
Do not modify the
product under
any circumstance .
Modifications may result
in serious injury .
All servicing and
maintenance, other
than the items listed in
this instruction manual,
should be performed by
an authorised service
centre .