Parkside PDSA 20-Li C2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 13

NOTE
The specified total vibration values
u
and the noise emission values can
also be used to make a provisional
load estimate .
WARNING!
m
Depending on the manner in which
u
the power tool is being used, and
in particular the kind of workpiece
being worked, the vibration and
noise emission values can deviate
from the values given in these
instructions during actual use of
the power tool .
The batteries have the following charging times depending on the charger:
X 20 V TEAM
* PLG 20 A4/C1 (max. 2.4 A)
* PLG 20 C2 (max. 3.5 A)
* PLG 20 A3/C3 (max. 4.5 A)
* PDSLG 20 A1 (max. 4.5 A)
* Battery charger
** Battery pack
X 12 V TEAM
* PLGK 12 A3
(max. 2.4 A)
* PLGK 12 B2
(max. 4.5 A)
10 GB
** PAPK 12 A3/A4
2 Ah
60 min
30 min
WARNING!
m
Try to keep the vibration loads
u
as low as possible . Measures to
reduce the vibration load are, e .g .
wearing gloves and limiting the
working time . Wherein all states
of operation must be included
(e .g . times when the power tool
is switched off and times where
the power tool is switched on but
running without load) .
Charging times
The product is part of the
X 20 V TEAM and X 12 V TEAM
series from Parkside and can only
be operated using batteries of the
X 20 V TEAM and X 12 V TEAM
series from Parkside . The batteries
may only be charged using
chargers of the X 20 V TEAM and
X 12 V TEAM series from Parkside .
** PAP 20
B1 2 Ah
60 min
45 min
35 min
35 min
** PAPK 12 B3/B4
4 Ah
120 min
60 min
** PAP 20
B3 4 Ah
120 min
80 min
60 min
60 min
** PAPK 12 D1
5 Ah
150 min
80 min