General Safety Instructions; General Power Tool Safety Warnings - Parkside Pdsa 20-Li C2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

X 12 V TEAM
* PDSLG
12 A1
(max. 4.5 A)
* PDSLG
12 A2
(max. 4.5 A)
* Battery charger
** Battery pack
General safety
instructions
˜ General power tool safety
warnings
WARNING!
m
Read all safety warnings,
u
instructions, illustrations and
specifications provided with
this power tool. Failure to follow
all instructions listed below may
result in electric shock, fire and/or
serious injury .
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains‑operated (corded)
power tool or battery‑operated (cordless)
power tool .
Work area safety
1) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents .
2) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes .
** PAPK 12 A3/A4
2 Ah
30 min
30 min
** PAPK 12 B3/B4
4 Ah
60 min
60 min
3) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control .
Electrical safety
1) The mains plug of the power tool
must fit into the socket. Never
modify the plug in any way.
Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock .
2) Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and
refrigerators. There is an increased
risk of electric shock if your body is
earthed or grounded .
3) Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock .
4) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk
of electric shock .
** PAPK 12 D1
5 Ah
80 min
80 min
GB 11