Parkside PKA 20-Li D3 Bedienungsanleitung Und Originalbetriebsanleitung Seite 12

Rapid battery
charger *
Model number:
– VDE plug:
– BS plug:
Input:
Rated voltage:
Rated frequency:
Rated power:
Output:
Rated voltage:
Charging current:
Protection class:
Fuse (internal):
Recommended ambient temperature:
Overall maximum
temperature:
While charging:
During operation:
During storage:
Noise emission value
The measured values were measured in
accordance with EN 1012-1.
Sound pressure level: L
Uncertainty:
Sound power level:
Uncertainty:
* Battery and charger are not included in the scope of delivery.
PLG 20 C3
HG08983
HG08983-BS
230–240 V~
50 Hz
120 W
21.5 V
4.5 A
II/
3.15 A/
T3.15A
+45 °C
+4 °C to +40 °C
+4 °C to +40 °C
+20 °C to +26 °C
= 72.3 dB
pA
K = 3 dB
pA
L = 84.2 dB
WA
K = 1.93 dB
WA
WARNING!
m
Wear ear protection!
NOTE
The declared vibration total value and
u
the declared noise emission value
have been measured in accordance
with a standard test method and may
be used for comparing one tool with
another.
The declared total vibration value and
u
the declared noise emission value
may also be used for a preliminary
assessment of exposure.
WARNING!
m
The vibration and noise emissions
u
during actual use of the power tool
can differ from the declared values
depending on the manner in which
the tool is used, especially what kind
of workpiece is processed.
Try to keep the vibration load as low
u
as possible. Measures to reduce
the vibration load are, e.g. wearing
gloves and limiting the working time.
Wherein all states of operation must
be included (e.g. times when the
power tool is switched off and times
where the power tool is switched on
but running without load).
GB 9