Troubleshooting; Cleaning And Maintenance - Parkside Pka 20-Li D3 Bedienungsanleitung Und Originalbetriebsanleitung

˜ Troubleshooting
Problem
The product
does not start.
The product
works with
intermittent
operation.
Low work
output
˜ Cleaning and maintenance
WARNING! Risk of injury!
m
Always switch the product
off, remove the battery
and let the product cool down
before performing inspection,
maintenance or cleaning works.
CAUTION!
m
Any maintenance and repair other
u
than described in this manual:
Contact an authorised service centre
or a similarly qualified person to
check or repair the product. Only use
original parts.
18 GB
Possible cause
The battery is empty.
[ 19 ]
The battery is not properly
[ 19 ]
inserted.
The ON/OFF switch
defective.
The motor is defective.
Internal loose contact.
The ON/OFF switch
defective.
Adapter not attached correctly
[ 18 ]
Pressure set incorrectly
Low battery power
19 ] [
Action
Charge the battery
(see „Charging the battery").
Insert the battery
(see „Inserting/removing the
battery").
Have the product repaired by
is
[ 4 ]
the Service Centre.
Have the product repaired by
the Service Centre.
is
[ 4 ]
Compressor mode
Setting the pressure
Charge the battery (see the
separate operating instructions
for the rechargeable battery
and charger).
NOTE
The following cleaning and servicing
u
should be done regularly. This will
ensure a long and reliable service life.
WARNING! Risk of electric shock!
m
Do not spray the product with water
u
and do not immerse it in water.
Never allow liquids to get into the
product.
NOTE
Do not use cleaning agents or
u
solvents. You may otherwise
irreparably damage the product.
The product must always be kept
u
clean, dry and free from oil or grease.
The product is maintenance-free.
u
Clean the product with a dry cloth.
o
19 ] [
correctly
19 ] [