Air Pump Mode; Deflating For Inflatable Articles - Parkside Pka 20-Li D3 Bedienungsanleitung Und Originalbetriebsanleitung

˜ Air pump mode
Air pump mode is suitable for filling and
deflating large-volume inflatable articles,
such as air mattresses, paddling pools
etc.which are filled or emptied at low
pressure.
1. Attach the hose
. Lock the hose in a clockwise
15 ] [
direction.
2. Remove the valve cap.
3. Insert the hose
[ 16 ]
inflation article. For 8 mm valves you
need the hose adapter
4. Press the On/Off switch
is ready for use.
5. Press the toggle switch
pump mode. The inflatable article is
inflated.
6. Once the desired filling volume is
reached, set the toggle switch
the middle position.
7. Pull the hose out of inflatable article
8. Unlock the hose
the hose off the air outlet
16 ] [
9. Put the valve cap back on the
inflatable article.
onto the air outlet
16 ] [
into the valve of the
.
[ 17 ]
. The device
[ 4 ]
towards air
6 ] [
to
6 ] [
anticlockwise. Pull
[ 16 ]
.
15 ] [
˜ Deflating for inflatable
articles
1. Attach the hose onto the air inlet
2. Insert the hose
16 ] [
inflation article. For 8 mm valves you
need the hose adapter
3. Press the On/Off switch
is ready for use.
4. Press the toggle switch
pump mode. The air in the inflatable
article is pumped out.
5. Once the inflatable article is deflated,
set the toggle switch
position.
6. Pull the hose
16 ] [
7. Pull the hose
16 ] [
inflatable article.
8. Put the valve cap back on the
inflatable article.
.
[ 24 ]
into the valve of the
.
17 ] [
. The device
4 ] [
towards air
6 ] [
to the middle
[ 6 ]
off the air inlet .
24 ] [
out of the valve of the
GB 17