EN
5. After sucking in 2.7l of water the float will close the suction port and the water will cease to be
sucked in. Turn off the vacuum cleaner in such a situation, disconnect it from the mains and
remove the water from the water container.
CAUTION! Do not suck in more than 2.7l of water. The excess water can
lead to the failure of the appliance. Empty the water container regularly.
CLEANING AND MAINTENANCE
CAUTION! Do not use sharp items, abrasive pastes, solvents and other
strong chemical agent for cleaning – their use can damage the appliance.
CAUTION! In order to achieve the best efficiency of the appliance, clean
the filters and water container after each use.
CAUTION! Do not install wet filters – it forms the vacuum cleaner damage
risk.
CAUTION! Prior to performing any maintenance or cleaning activities, al-
ways turn off the appliance and unplug it from the mains socket. Do not
immerse the appliance in water!
1. After each use remove the water from the water container. Clean and dry the container.
2. Never leave the vacuum cleaner with dirty water inside the water container. Moisture and
impurities can give rise to unpleasant smells inside the container and adversely affect further
use of the appliance.
3. Remove the diffuser B4 and clean it under warm running water with detergent. Remember to
clean the DWS diffuser ports thoroughly..
4. Check the cleanliness of HEPA 13 filter regularly. The filter can be cleaned under running water.
After a longer period of using, the filter loses its properties. Then, it is necessary to replace it
with the new one.
5. Periodically remove the sponge silencer insert from the HEPA filter (option), rinse it clean in
water and leave until completely dry. Next, reinstall it in the HEPA filter.
6. Periodically remove the motor protection filter B5 from the vacuum cleaner, rinse it in water
and dry it. Replace it every 6 months.
7. To maintain the warranty rights, ensure the safety and satisfaction associated with using the
appliance, use only original parts and accessories.
36