Accessories - Mpm Mod-47 Bedienungsanleitung

water in the tank. This could cause a small amount of water to
be ejected outside the unit.
- CAUTION! Water can only be drawn in when a float attach-
ment is installed. Do not suck in water when a DWS diffuser
is installed in the hoover.
ELECTROSTATICS
While vacuuming certain surfaces in low air humidity conditions, the appliance can be-
come slightly electrified. It is a natural phenomenon. It does not damage the appliance
and does not form the defect of the appliance. In order to minimise this phenomenon, it is
recommended to:
- discharge the appliance by frequent touching of metal objects with pipe in a given room,
- increase the air humidity in the room,
- apply the publicly available antistatic agents

ACCESSORIES

A. MOTOR SET
The section encompasses the motor, ON/OFF switch and working elements. On top of
this section there is a HEPA 13 filter used for separating dust residue and other tiny parti-
cles from exhaust air.
A1 ON/OFF switch button
A2 Power cord rewind button
A3 HEPA 13 filter
A4 HEPA 13 filter cover
A5 Air inlet
A6 Handle
A7 Rubberised wheels
A8 Parking clip
A9 Power cord with plug
A10 Housing
B. CONTAINER
The section encompasses the water filter container with components used for collecting
impurities. The container is placed on the housing.
B1 Transparent water container – 1.2L
B2 Water container lid
B3 Water container handle
B4 DWS diffuser (for dry vacuuming only)
EN
33