Cleaning And Maintenance - Mpm Mod-34 Bedienungsanleitung

PARKING THE VACUUM CLEANER IN THE WALL MOUNT
The MOD-34 vacuum cleaner includes a wall parking
mount (16) for easy and space-saving storage. Install the wall
parking mount on a wall to use it:
1. Choose a place on a wall high enough above the floor so that
the vacuum cleaner fits parked and with its telescopic wand
and floor tool attached. Make sure there is no wiring in the
wall within the envelope of the wall parking mount.
2. Place the wall parking mount (16) to the selected location on
the wall and mark the holes to drill with the pencil. Drill the
holes at the market locations to fit the plugs. Next, drive in the
plugs flush and attach the wall parking mount with the screws
(17) included with the product —
3. Now, you can park and store the vacuum cleaner on the
mount .
Fig. 4

CLEANING AND MAINTENANCE

1. Clean the outer surface of the vacuum cleaner, the interior of
the dust canister and the accessories (tools) with a damp cloth.
Next, wipe them dry. Use a mild detergent to remove persis-
tent dirt.
2. Empty the dust canister every time you finish vacuum clean-
ing. Clean the EPA (7) and the filter cage (8)(which is also a
coarse filter) every few times you empty the dust canister. See
the assembly and disassembly of the filter in "ASSEMBLY AND
DISASSEMBLY". Wash the filter cage (8)in water and leave to
dry. The EPA filter (7) must be cleaned gently on the outside,
with a soft brush.
CAUTION! Do not clean the EPA filter (7) wet!
3. Periodically clean the exhaust filter (10). It is accessed by re-
moving the exhaust filter cover (11). Open the exhaust filter cov-
er by turning it a bit counter-clockwise. Remove the exhaust filter (10), flush it clean with water,
and leave until thoroughly dry. Replace the exhaust filter. Close and secure the exhaust filter
cover by turning it a bit clockwise.
CAUTION! Do not install the exhaust filter (10) when wet! Dry it completely before
reassembly.
.
Fig. 3
Fig. 3
Fig. 4
EN
27