Combinations Of Cutting Attachments And Deflectors; Spare Parts And Accessories; Disposal; Ec Declaration Of Conformity - Stihl Fsa 86 R Gebrauchsanleitung

21 Combinations of Cutting Attachments and Deflectors

STIHL recommends wearing hearing protection.
Using with a mowing head except PolyCut 6-2
– Sound pressure level L
fied in EN 50636‑2‑91: 77 dB(A)
– Sound power level L
in EN 50636-2-91: 91 dB(A)
– Vibration level a measured as specified in
hv
EN 50636-2-91
– Control handle: 2.0 m/s².
– Loop handle: 3.7 m/s².
Using with a mowing head PolyCut 6-2
– Sound pressure level L
fied in EN 50636‑2‑91: 80 dB(A)
– Sound power level L
in EN 50636-2-91: 92 dB(A)
– Vibration level a measured as specified in
hv
EN 50636-2-91
– Control handle: 2.0 m/s².
– Loop handle: 3.7 m/s².
The sound and vibration values indicated were
measured according to a standardized test
method and can be used as a basis for compar‐
ing electric power tools. The actual sound and
vibration levels may vary from the values indica‐
ted, depending on the type of application and the
accessories used. The sound and vibration lev‐
els indicated can be used for an initial estimate
of the sound and vibration load. The actual
sound and vibration stress has to be estimated.
The times can be taken into account in the esti‐
mate when the electric power tool is switched off
and also when it is switched on but running with‐
out any load.
For information on compliance with the Physical
Agents (Vibration) Directive 2002/44/EC, see
www.stihl.com/vib.
20.6 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
0458-833-9621-D
measured as speci‐
pA
measured as specified
wA
measured as speci‐
pA
measured as specified
wA
21 Combinations of Cutting
Attachments and Deflec‐
tors
21.1 STIHL FSA 86 R Brushcutters
The following mowing heads may be mounted
together with the guard for mowing heads:
– STIHL AutoCut C 6-2 mowing head:
– with round, low-noise mowing line with a
diameter of 2.0 mm or 2.4 mm
– PolyCut 6-2 mowing head
– with blades (Ø 300 mm)
– DuroCut 5-2 mowing head:
– with round, low-noise mowing lines with a
diameter of 2.0 mm
22 Spare Parts and Accesso‐
ries
22.1

Spare parts and accessories

These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.

23 Disposal

23.1 Disposing of the Trimmer and
Battery
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
24 EC Declaration of Con‐
formity
24.1 STIHL FSA 86 R Brushcutters
ANDREAS STIHL AG & Co. KG
Badstraße 115
English
35