Removing And Fitting The Battery; Inserting The Battery; Switching The Trimmer On/Off; Testing The Trimmer And Battery - Stihl Fsa 86 R Gebrauchsanleitung

English
10 Removing and Fitting the
Battery
10.1

Inserting the Battery

1
2
► Insert the battery (1) into the battery compart‐
ment (2) as far as it will go.
The battery (1) engages with a click and is
now locked.
10.2 Removing the battery
► Keep one hand in front of the battery compart‐
ment so that the battery (2) cannot fall out.
1
► Press both locking levers (1).
The battery (2) is now unlocked and can be
removed.
11 Switching the Trimmer
On/Off
11.1 Switching on the brushcutter
► Hold the brushcutter firmly with one hand on
the control handle so that your thumb wraps
around the grip (4) of the control handle.
► Hold the brushcutter firmly with your other
hand on the loop handle or the handle hose so
that your thumb holds the loop handle or the
handle hose.
30
► Use your thumb to push the release slide (1)
in the direction of the loop handle and hold it
there.
► Squeeze and hold the trigger (2) with your
index finger.
The brushcutter accelerates and the cutting
attachment rotates.
You can now release the release slide (1).
If the ergo lever (3) is pressed, the trigger (2)
remains unlocked. This means that the trigger
can be released and pressed again without
pushing the release slide again in the direction of
the loop handle.
If the trigger (2) and the ergo lever (3) are
released, the trigger (2) is locked. To unlock the
trigger (2), push and hold the release slide (1)
again towards the loop handle.
1 11.2
► Release the trigger and the Ergo lever.
2
► Wait for the cutting attachment to stop rotat‐
ing.
► If the cutting attachment continues to rotate:
Remove the battery and contact your STIHL
dealer.
The brushcutter is defective.
12 Testing the Trimmer and
12.1
Release slide, Ergo lever and trigger
► Remove the battery.
► Try squeezing the trigger switch without acti‐
vating the release slide.
► If you can press the trigger: Stop using your
brushcutter and contact a STIHL dealer.
The release slide is faulty.
► Push the release slide in the direction of the
loop handle with your thumb and hold it there.
► Press and hold Ergo lever.
► Press the trigger.
The release slide can be released.
► Release the trigger and the Ergo lever.

10 Removing and Fitting the Battery

Switching off the brushcutter
Battery

Checking the controls

1
3
4
2
0458-833-9621-D