Combinations Of Cutting Attachments, Deflectors And Carrying Systems - Stihl FSA 90 Gebrauchsanleitung

22 Combinations of Cutting Attachments, Deflectors and Carrying Syst...
– Vibration level a measured according to
hv
EN 50636-2-91
– Control handle: 1.0 m/s².
– Left handle: 1.0 m/s²
FSA 90 R
STIHL recommends that you wear hearing pro‐
tection.
Using with a mowing head:
– Sound pressure level L
to EN 50636-2-91: 83 dB(A)
– Sound power level L
EN 50636-2-91: 92 dB(A)
– Vibration level a measured according to
hv
EN 50636-2-91
– Control handle: 3.5 m/s².
– Left handle: 4.8 m/s²
Using with a metal cutting attachment:
– Sound pressure level L
to EN 50636-2-91: 73 dB(A)
– Sound power level L
EN 50636-2-91: 84 dB(A)
– Vibration level a measured according to
hv
EN 50636-2-91
– Control handle: 1.4 m/s².
22 Combinations of Cutting Attachments, Deflectors and Carrying
Systems
22.1

Combinations of cutting attachments, deflectors and carrying systems

FSA 90
Cutting attachment
– PolyCut 18-2 (Ø 335 mm)
mowing head
Mowing head with 2.4 mm dia‐
meter "round, quiet" mowing line:
– AutoCut 25-2 mowing head
– DuroCut 20-2 mowing head
– SuperCut mowing head 20-2
– Grass cutting blade 230-2
(230 mm dia.)
– Grass cutting blade 230-4
(230 mm dia.)
– Grass cutting blade 230-8
(230 mm dia.)
– Grass cutting blade 260-2
(260 mm dia.)
FSA 90 R
Cutting attachment
– PolyCut 18-2 (Ø 335 mm)
mowing head
0458-709-9821-D
measured according
pA
measured according to
wA
measured according
pA
measured according to
wA
Deflector
– Guard for mowing
heads
– Deflector for metal
cutting attachments
Deflector
– Guard for
mowing heads
– Left handle: 1.4 m/s²
The vibration values quoted above have been
measured according to a standardized test pro‐
cedure and may be used to compare electric
power tools. Depending on the type of usage,
the vibrations that actually occur may differ from
the values quoted. The vibration values quoted
may be used for an initial assessment of the
user's exposure to vibrations. The actual expo‐
sure to vibrations has to be estimated. This proc‐
ess may also take into account times during
which the electric power tool is switched off and
times during which it is switched on but running
off load.
Information on compliance with Vibration Direc‐
tive 2002/44/EC is available at www.stihl.com/
vib.
21.6 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
Carrying system
– Shoulder strap
– Full harness with quick-release system
– STIHL AR battery with the support cus‐
hion
– Battery belt with attached "AP belt bag
with connecting cable" together with the
shoulder strap
– Battery belt with strap and attached "AP
belt bag with connecting cable" together
with the support cushion
– Carrying system with built-in "AP belt
bag with connecting cable" together with
the support cushion
Barrier bar Carrying System
– optional – Shoulder strap
– Full harness with quick-
release system
English
47