Specifications; Temperature Limits - Stihl Fsa 86 R Gebrauchsanleitung

English
Error LEDs on the
battery
The STIHL con‐
nected app is
unable to find the
battery with .
19.2 Product Support and Assis‐
tance on Use
Product support and assistance on use are avail‐
able from STIHL servicing dealers.
For contacts and other information, please visit
https://support.stihl.com or www.stihl.com.

20 Specifications

20.1 STIHL FSA 86 R Brushcutters
– Approved batteries:
– STIHL AP
– STIHL AR
– Weight with heaviest mowing head and asso‐
ciated heaviest deflector, without battery:
3.35 kg
– Length without cutting tool: 1725 mm
– Maximum speed of cutting attachment:
8,000 rpm
– Degree of protection: IPX4 (protection against
splash water from any direction)
For runtime, see www.stihl.com/battery-life.
20.2 STIHL AP Battery
– Battery technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: See rating label
®
– Bluetooth radio interface (only for batteries
with ):
– Data connection: Bluetooth
mobile device must be compatible with
®
Bluetooth Low Energy 5.0 and support
Generic Access Profile (GAP).
– Frequency band: ISM band 2.4 GHz
– Maximum RF power transmitted: 1 mW
– Signal range: approx. 10 m. The signal
strength depends on the ambient conditions
and the mobile device. The signal range can
vary greatly depending on local conditions
and the receiver used. The range may be
perceptibly reduced inside enclosed rooms
34
Cause
®
The Bluetooth radio
interface on the bat‐
tery or mobile device
is deactivated.
Excessive distance
between the battery
and the mobile
device.
®
5.1. The
Remedy
► Activate the Bluetooth
the battery or mobile device.
► Reduce the distance,
► If the STIHL connected app is still unable
to find the battery: Contact a STIHL
authorized dealer.
and through metal barriers (such as walls,
shelves or cases).
– Mobile device operating system require‐
ments: Android or iOS (current version or
higher)
The power output of the battery may vary
depending on the battery product used.
20.3

Temperature limits

WARNING
■ The battery is not protected against all ambi‐
ent conditions. If the battery is exposed to cer‐
tain environmental conditions, it may catch fire
or explode. This may result in serious injury to
people and damage to property.
► Do not charge the battery below -20°C or
above 50°C.
► Do not use the brushcutter or battery below
-20°C or above 50°C.
► Do not store the brushcutter or battery
below -20°C or above +70°C.
20.4 Recommended temperature
ranges
For optimum performance of the brushcutter and
battery, note the following temperature ranges:
– Charging: 5°C to 40°C
– Use: - 10 °C to + 40 °C
– Storage: - 20 °C to + 50 °C
If the battery is charged, used or stored outside
the recommended temperature ranges, perform‐
ance may be restricted.
If the battery is wet or moist, allow the battery to
dry for at least 48 h between 15°C and 50°C and
with less than 70% humidity. Higher humidity
may extend the drying time.
20.5 Sound and vibration values
The K-value for the sound pressure level is
2 dB(A). The K value for the sound power level is
2 dB(A). The K value for the vibration level is
2 m/s².
20 Specifications
®
radio interface on
20.2.
0458-833-9621-D