Preparing Trimmer For Operation; Charging The Battery, Leds - Stihl Fsa 86 R Gebrauchsanleitung

5 Preparing Trimmer for Operation

► Clean the brushcutter, deflector, cutting
attachment and battery as described in this
User Manual.
■ If the brushcutter, deflector, cutting attachment
or battery are not serviced or repaired cor‐
rectly, components may no longer function
properly or safety devices may be rendered
inoperative. There is a risk of serious or fatal
injury.
► Do not attempt to service or repair the trim‐
mer, deflector, cutting attachment or bat‐
tery.
► If the brushcutter, deflector, cutting attach‐
ment or battery require servicing or repairs:
Contact your STIHL authorized dealer for
assistance.
5 Preparing Trimmer for
Operation
5.1 Preparing the brushcutter for
operation
The following steps must be performed before
commencing work:
► Ensure that the following components are in a
safe condition:
– Brushcutter, 4.6.1.
– Deflector, 4.6.2.
– Mowing head,
– Battery, 4.6.4.
► Check the battery,
► Fully charge the battery as described in the
User Manual for the STIHL AL 101, 301,
301-4, 501 chargers.
► Clean the brushcutter,
► Attach the spacer,
► Attach the deflector,
► Attach the loop handle,
► Mount the mowing head,
► Adjust the loop handle,
► Check the controls,
► If you cannot carry out these steps: Do not use
your brushcutter and instead contact a STIHL
authorized dealer.
5.2 Connecting a battery with Blue‐
tooth radio interface with the
®
STIHL connected app
► Activate the Bluetooth
mobile device.
► Activating the Bluetooth
the battery, 7.1.
0458-833-9621-D
4.6.3.
12.2.
17.1.
8.1.
8.2.
8.3.
8.4.
8.3.
12.1.
®
radio interface on the
®
radio interface on
► Download the STIHL connected app to the
mobile device from the App Store and create
an account.
► Open and sign in to the STIHL connected app.
► Add the battery in the STIHL connected app
and follow the instructions on the screen.
For contacts and other information, please visit
https://support.stihl.com or see the STIHL con‐
nected app.
The STIHL connected app is available interna‐
tionally.
6

Charging the Battery, LEDs

6.1 Charging the battery
The charging time depends on various factors,
e.g. the battery temperature or the ambient tem‐
perature. For optimal performance, note the rec‐
ommended temperature ranges,
actual charging time may vary from the charging
time indicated. The charging time is indicated at
www.stihl.com/charging-times.
► Recharge the battery as described in the User
Manual for STIHL AL 101, 301, 301-4, 501
chargers.
6.2 Displaying the charge level
1
► Press the button (1).
The LEDs light up green for about 5 seconds
and indicate the state of charge.
► If the LED on the right flashes green: Charge
the battery.
6.3 LEDs on Battery
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
19.
Malfunction in trimmer or battery.
English
20.4. The
80-100%
60-80%
40-60%
20-40%
0-20%
27