Attachment Ot Tabletop To Underframe - Cor Level System Bedienungsanleitung

GB
Now place the top panels on the frame and push them together evenly with the other panels.
Make sure that the connecting bolts are inserted into the holes provided. Carefully align the joints
and butt joints so that the panel transitions are flush in all directions. Then carefully tighten all
Maxifix connectors one by one. Make sure that the tabletops do not shift slightly against each
other.
6.7 Attachment of tabletop to under frame
Now carefully align the assembled tabletop on the frame so that all the fixing holes are positioned
11
over the threaded sockets provided. Attach the underframe using the supplied screws and
tighten them all firmly. Finally, you can use the levelling glides under each leg to adjust the table
to any unevenness of the floor.
5 3