Notes On Signs, Symbols And Markings; Subsystem Documentation - Cor Level System Bedienungsanleitung

1.4 Notes on signs, symbols and markings

GB
The safety notes in the operating instructions are structured as follows:
1
2
3
The following hazard symbols (according to ASR A1.3) are used in the operating instructions:
Electric shock
warning
Eco-hazard
warning

1.5 Subsystem documentation

For the safe operation of the table, the documentation of the following subsystems of the various
manufacturers must be observed!
• Linak control box CBD6SP00020A-009
• Linak built-in actuator DB 14
4 0
Danger!
This hazard warning indicates a directly hazardous situation which will result in
death or serious injury if the safety measures are not followed.
Warning!
This hazard warning indicates a potentially hazardous situation which may result
in death or serious injury if the safety measures are not followed.
Caution!
This hazard warning indicates a potentially hazardous situation which may result
in minor or moderate injury if the safety measures are not followed.
This note indicates possible damage to property or a process of special interest/
importance that may occur if the safety measures are not followed.
Hand injury
warning
No
switching
General
warning
Use foot
protection