Cor Level System Bedienungsanleitung Seite 117

GB
7
Insert all Maxifix connectors into the holes provided, with the arrow pointing towards the edge.
8
Insert all connecting bolts into the holes provided.
Now push all 3 tabletops together evenly to form one large tabletop. Ensure that the connecting
bolts are inserted into the holes provided. Carefully align the joints and butt joints so that the
tabletop transitions are flush in all directions.
Then carefully tighten all Maxifix connectors one by one. Make sure that the tabletops do not shift
slightly against each other.
4 5