Favourite Position; Moving To A Favourite Position; Moving Automatically To A Favourite Position; Deleting Favourite Positions - Cor Level Montageanleitung

7.3 Favourite position

GB
Saving favourite positions:
1) Set the desk to the preferred position.
2) Press and hold the Star key for two seconds.
The light bar flashes white twice to indicate that the position is being saved. The position has
not been saved until the light bar becomes continuously white. If the user sets the desktop to a
different position and saves this position, he overwrites the favourite position that is closest to the
current position.

7.4 Moving to a favourite position

Once the favourite position has been saved, it can be reached simply by pressing the toggle
switch.
1) Press and hold – when a saved position is reached, the table stops.
2) Release the toggle switch within one second.
In this way, the user can easily switch between sitting and standing height without looking at the
toggle switch.
When the table stops at a saved position, the user can:
• Press and hold the toggle switch for one second, or
• Release the toggle switch and press it again.
The table moves past the saved position in the direction in which you are pressing.

7.5 Moving automatically to a favourite position

1) By pressing the toggle switch twice, the table automatically moves to the first position in the
direction pressed.
2) Press the toggle switch again to stop the table moving.

7.6 Deleting favourite positions

To delete all saved positions, press the Star key for eight seconds.
The LED flashes red to indicate that the operation is complete.
6 0