Transport; Installation - Cor Level System Bedienungsanleitung

5 Transpor t
GB

5.1 Transport

Transport using industrial trucks:
If a hand pallet truck or forklift truck is used for loading or unloading, it must be suitable for the
loads and in perfect working order. The centre of gravity of the transported goods must always be
observed!
During transport, the load must be evenly distributed and the components properly secured.
Avoid jerky movements.

5.2 Installation

For the proper and safe installation of the table, it is absolutely necessary that a level installation
surface and sufficient load-bearing capacity are available to ensure the stability of the table.
4 6
Warning!
When transporting outdoors, make sure that no water gets onto the individual
components of the system, otherwise short circuits could occur when connecting
the sensors later.
Warning of crushing hazard!
When shipping the table, it must be lifted and transported. The table may tip over
and fall as a result of improper lifting or transportation.
At least two people are required to lift the table.
Wear safety shoes when transporting the table!