1 Introduc tion
The purpose of the operating instructions is to make it easier for you to get to know the Level
Table electric and to use it for its intended purpose. The operating instructions contain important
information for safe and proper operation of the Level Table electric. Observing these instructions
helps to reduce hazards and repair costs and to increase reliability and service life. Existing
national regulations on accident prevention and environmental protection also apply.
The operator should ensure that any person operating the Level Table electric reads and applies
these operating instructions. The operating instructions must be kept in a known and easily
accessible place and consulted even in the event of the slightest doubt.
1.1 Nameplate CE
The nameplate contains the following information:
When ordering spare parts, please state all of the above data.
1.2 Nameplate UKCA
The nameplate contains the following information:
When ordering spare parts, please state all of the above data.
1.3 Information for the operator
In addition to the operating instructions and the binding accident prevention regulations applicable
in the country of use or at the place of use, the recognised technical rules for safe and technically
correct work must also be observed. The operator of the table may not make any major changes,
additions or conversions to the table without the permission of COR Sitzmöbel Helmut Lübke
GmbH & Co KG. Spare parts to be used must meet the technical requirements specified by COR
Sitzmöbel Helmut Lübke GmbH & Co. KG. This is always guaranteed for original spare parts from
the respective valid spare parts list. Work on electrical components may only be carried out by a
qualified electrician or by instructed persons under the direction and supervision of a qualified
electrician in accordance with electrotechnical regulations.
Manufacturer
Product
Serial number
Year of manufacture
Manufacturer
Product
Serial number
Year of manufacture
GB
3 9