Reminder; Restarting The Reminder; Reminder Timeout; Reminder Intervals - Cor Level System Bedienungsanleitung

7.8 Reminder

GB
The reminder LED is located in the lower left corner of the toggle switch. The purpose of the LED
is to indicate the position of the desk (sitting and standing height). The indication depends on the
selected reminder interval. While the user is sitting for a suitable period according to the set interval,
the LED will steadily pulsate green. When the sitting interval has expired, the steady, pulsating
green changes to a fast, pulsating orange and a static orange for one minute to indicate that the
user should set the desk to the standing height. At standing height, the green LED pulsates until a
possible timeout occurs. When the desk is set back to sitting height, the green LED pulsates until
the reminder disappears again.

7.9 Restarting the reminder

The reminder is automatically restarted when the desk is lowered to sitting height.

7.10 Reminder timeout

After four hours without action, the light bar goes out. When the toggle switch is tilted, the green
light comes on again.

7.11 Reminder intervals

The toggle switch has a „reminder button" on the left side – symbolised by a bell. Pressing this
button sets the interval for how often you will receive a reminder to change position. The LED
lights up in three different intensities, each representing an interval.
The three intervals are:
• Interval 1: Reminder after 55 minutes of sitting
• Interval 2: Reminder after 50 minutes of sitting
• Interval 3: Reminder after 45 minutes of sitting
The selected standard interval reminds you after 55 minutes, which means that the LED is white
at the lowest intensity.
5 3