Notes On Signs, Symbols And Markings - Cor Level Montageanleitung

Work on electrical components may only be carried out by a qualified electrician or by instructed
GB
persons under the direction and supervision of a qualified electrician in accordance with electro-
technical regulations.

1.3 Notes on signs, symbols and markings

The safety notes in the operating instructions are structured as follows:
The following hazard symbols (according to ASR A1.3) are used in the operating instructions:
Electric shock
warning
Eco-hazard
warning
4 4
Danger!
This hazard warning indicates a directly hazardous situation which will result in
death or serious injury if the safety measures are not followed.
Warning!
This hazard warning indicates a potentially hazardous situation which may result
in death or serious injury if the safety measures are not followed.
Caution!
This hazard warning indicates a potentially hazardous situation which may result
in minor or moderate injury if the safety measures are not followed.
This note indicates possible damage to property or a process of special interest/
importance that may occur if the safety measures are not followed.
Hand injury
warning
No
switching
General
warning
Use foot
protection