Introduction; Nameplate; Information For The Operator - Cor Level Montageanleitung

1 Introdc tion
The purpose of the operating instructions is to make it easier for you to get to know the Level
Table electric and to use it for its intended purpose.
The operating instructions contain important information for safe and proper operation of the
Level Table electric. Observing these instructions helps to reduce hazards and repair costs and to
increase reliability and service life.
Existing national regulations on accident prevention and environmental protection also apply.
The operator should ensure that any person operating the Level Table electric reads and applies
these operating instructions.
The operating instructions must be kept in a known and easily accessible place and consulted
even in the event of the slightest doubt.

1.1 Nameplate

The nameplate contains the following information:
When ordering spare parts, please state all of the above data.

1.2 Information for the operator

In addition to the operating instructions and the binding accident prevention regulations applica-
ble in the country of use or at the place of use, the recognised technical rules for safe and techni-
cally correct work must also be observed.
The operator of the machine may not make any major changes, additions or conversions to the
machine without the permission of COR Sitzmöbel Helmut Lübke GmbH & Co KG.
Spare parts to be used must meet the technical requirements specified by COR Sitzmöbel Helmut
Lübke GmbH & Co. KG. This is always guaranteed for original spare parts from the respective valid
spare parts list.
Manufacturer
Product
Serial number
Year of manufacture
GB
4 3