Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.7 Connecting Bluetooth
GB
1) Download the Desk Control App for your device from the App Store or Google Play.
2) Press the Bluetooth button in the middle for two seconds to activate pairing mode.
The LED flashes blue when the control panel is in pairing mode.
7.8 Reminder
The reminder LED is located in the lower left corner of the toggle switch. The purpose of the LED
is to indicate the position of the desk (sitting and standing height). The indication depends on the
selected reminder interval. While the user is sitting for a suitable period according to the set inter-
val, the LED will steadily pulsate green. When the sitting interval has expired, the steady, pulsating
green changes to a fast, pulsating orange and a static orange for one minute to indicate that the
user should set the desk to the standing height. At standing height, the green LED pulsates until a
possible timeout occurs. When the desk is set back to sitting height, the green LED pulsates until
the reminder disappears again.
7.9 Restarting the reminder
The reminder is automatically restarted when the desk is lowered to sitting height.
7.10 Reminder timeout
After four hours without action, the light bar goes out. When the toggle switch is tilted, the green
light comes on again.
7.11 Reminder intervals
The toggle switch has a „reminder button" on the left side – symbolised by a bell. Pressing this
button sets the interval for how often you will receive a reminder to change position. The LED
lights up in three different intensities, each representing an interval.
The three intervals are:
• Interval 1: Reminder after 55 minutes of sitting
• Interval 2: Reminder after 50 minutes of sitting
• Interval 3: Reminder after 45 minutes of sitting
The selected standard interval reminds you after 55 minutes, which means that the LED is white
at the lowest intensity.
6 1
Werbung
Kapitel
Inhaltsverzeichnis
