Operation; Setting The Rotating Direction; Torque Control; Switching On And Off - Parkside Performance Pabsp 20 Li C4 Bedienungsanleitung

Screw bits are labelled according to
their dimensions and their shape.
If you are uncertain, always check
whether the bit fits tightl in the screw
head without any free play.
˜ Operation
˜ Gear selection
ATTENTION! Risk of product
m
damage!
Do not operate the gear
selector
4 ] [
come to a standstill.
Change the gear by sliding the gear
o
selector forwards or backwards
4 ] [
(fig. F).
1 gear:
st
Suitable for:
Speed:
Torque:
2 gear:
nd
Suitable for:
Speed:
Torque:
˜ Setting the rotating direction
ATTENTION! Risk of product
m
damage!
Do not operate the rotation
direction switch
product has come to a standstill.
Change the direction of rotation
o
by pressing the rotation direction
switch towards the left or right
5 ] [
(fig. G).
When the rotation direction switch
is in the middle position, the on/off
switch is locked.
[ 6 ]
until the product has
Screwing
Low
High
Drilling
High
Low
until the
5 ] [
5 ] [
˜ Torque control
The torque can be adjusted by turning
the torque sleeve
Small screws or soft materials: Select
o
a low level.
Large screws, hard materials or
o
removing screws: Select a high level.
For drilling operation: Turn the torque
o
sleeve to the
3 ] [
˜ Switching on and off
NOTE
The on/off switch
u
locked.
Switching on: Press and hold the on/
o
off switch .
[ 6 ]
Regulate the speed as required (see
"Speed control ) (fig. I).
Switching off: Release the on/off
o
switch .
[ 6 ]
˜ Speed control
B using the on/off switch
progressively control the speed:
Pressure
Gentle pressure:
Greater pressure:
˜ LED work light
NOTE
The LED work light
u
an additional approx. 10 seconds
after switching off the product.
This product is equipped with a LED
work light to illuminate the immediate
[ ]
working area to improve visibility in poorly
lit areas.
The LED work light
automatically as soon as the product is
switched on.
(fig. H).
[ 3 ]
position.
cannot be
[ 6 ]
, you can
6 ] [
Speed
Lower speed
Higher speed
stays on for
[ ]
lights up
[ ]
GB/IE 41