You Will Need (For Use With The Parkside App); Parkside App; Requirements; Activating/Deactivating The Bluetooth ® Function On The Battery - Parkside Performance Pabsp 20 Li C4 Bedienungsanleitung

The LED work light
is intended to illuminate the immediate
work area.
An other use or modification of the
product are considered improper use
and can result in hazards such as
death, life-threatening injuries and
damage. The manufacturer is not liable
for any damages caused by improper
use. The product is not intended for
commercial use or for any other use.
The PARKSIDE app can be
used with this product when
a PARKSIDE Smart Battery
is installed.
˜ You will need (for use with the

PARKSIDE App)

Mobile device:
iOS 15.0 or higher
Android 6.0 or higher
˜ PARKSIDE app
Using the PARKSIDE app, you can
monitor the product and control certain
functions of the product. The extent
of controlling those functions may be
changed with firmware updates. ou
can find detailed information on the
PARKSIDE app in the user manual for
the Smart battery.
˜ Requirements
In order to search, locate and connect
to the PARKSIDE app, the following
requirements must be met:
The PARKSIDE app is installed on
–
your smartphone and Bluetooth
activated.
PARKSIDE Smart battery, model
–
number PAPS 204 A1, PAPS 208 A1
or PAPS 2012 A1, is attached to the
product.
on this product
[ ]
is
®
The Smart battery is paired with the
–
PARKSIDE app.
The product can communicate with
–
the PARKSIDE app via the Smart
battery.
˜ Activating/deactivating the
Bluetooth function on the
®
battery
Activate the Bluetooth
o
Press and hold the
the battery pack
The orange LED of the charging level
LEDs lights up. The Bluetooth
[ ]
function is activated.
Release the
Deactivate the Bluetooth
o
Press and hold the
the battery pack
The orange LED of the charging level
LEDs goes off. The Bluetooth
[ ]
function is deactivated. In the
PARKSIDE app the product is shown
as offline.
˜ Connecting the product to
the PARKSIDE app
1. Press and hold the
the battery pack
activate the Bluetooth
2. Enable the Bluetooth
smartphone.
3. Open the PARKSIDE app.
Connecting the product for the first
time to the PARKSIDE app
1. Select {Add a tool}
tools} tab. The PARKSIDE app scans
the area for available devices. The
PARKSIDE app indicates if available
devices have been found.
2. Tap on the product name to select the
batter pack .
[ ]
function:
®
button on
[ ]
for 3 seconds.
[ ]
®
button .
[ ]
function:
®
button on
[ ]
for 10 seconds.
[ ]
®
button on
[ ]
for 3 seconds to
[ ]
function.
®
function on your
®
or on the {Your
GB/IE 31