Drill Safety Warnings - Parkside Performance Pabsp 20 Li C4 Bedienungsanleitung

8) Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles and
grasping surfaces do not allow for
safe handling and control of the tool in
unexpected situations.
Battery tool use and care
1) Recharge only with the charger
specified b the manufacturer. A
charger that is suitable for one type of
batter pack ma create a risk of fire
when used with another battery pack.
2) Use power tools only with
specificall designated batter
packs. Use of any other battery
packs may create a risk of injury and
fire.
3) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal
to another. Shorting the battery
terminals together may cause burns
or a fire.
4) Under abusive conditions,
liquid may be ejected from the
battery; avoid contact. If contact
accidentall occurs, flush with
water. If liquid contacts eyes,
additionally seek medical
help. Liquid ejected from the battery
may cause irritation or burns.
5) Do not use a battery pack
for tool that is damaged or
modified. Damaged or modified
batteries exhibit unpredictable
behaviour resulting in fire, explosion
or risk of injury.
6) Do not expose a battery pack or
tool to fire or e cessive tempera-
ture. Exposure to fire or temperature
above 130 °C may cause explosion.
36 GB/IE
7) Follow all charging instruction
and do not charge the battery
pack or tool outside the
temperature range specified in the
instruction. Charging improperly or
at temperatures outside the specified
range may damage the battery and
increase the risk of the fire.
CAUTION! RISK OF
EXPLOSION! Never charge
non-rechargeable batteries!
Protect the rechargeable
battery from heat, for example
max. 45 °C
from continuous exposure
to sunlight, fire, water and
moisture. There is a risk of
explosion.
Service
1) Have your power tool serviced by
a qualified repair person using onl
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
2) Never service damaged battery
packs. Service of battery packs
should be only be performed by the
manufactured or authorized service
providers.
˜ Drill safety warnings
1. Safety instructions for all
operations
1) Hold the power tool by insulated
gripping surfaces, when performing
an operation where the accessory
tool or fasteners may contact
hidden wiring. Accessory tools or
fasteners contacting a "live" wire may
make exposed metal parts of the
power tool "live" and could give the
operator an electric shock.