Cleaning and care
WARNING!
m
Alwa s switch the product off,
remove the battery pack
and let the product cool down
before performing inspection,
maintenance and cleaning work!
Cleaning
NOTE
Do not use chemical, alkaline,
u
abrasive or other aggressive
detergents or disinfectants to
clean this product as they might be
harmful to its surfaces.
Regular and proper cleaning will help
ensure safe use and prolong the life of
the product.
The vents must always be clear.
Never allow fluids to get into the
o
product.
The product must always be kept
o
clean, dry and free from oil or grease.
Remove debris from it after each use
and before storage.
Clean the product with a dry cloth. Use
o
a soft brush for areas that are hard to
reach.
In particular clean the air vents after
o
every use with a cloth and soft brush.
Maintenance
Before and after each use, check
o
the product and accessories (e.g.
accessory tools) for wear and damage.
If required, exchange them for new
ones as described in this instruction
manual. Observe the technical
requirements (see "Technical data").
Repair
This product does not contain any
o
parts that can be repaired by the user.
Contact an authorised service centre
or a similarl qualified person to have it
[
]
checked and repaired.
Storage
Push the rotation direction switch
o
to the centre position to lock the on/off
switch
Clean the product as described above.
o
Store the product and its accessories
o
in a dark, dry, frost-free, well-ventilated
place.
Always store the product in a place
o
that is inaccessible to children. The
ideal long term storage (longer than
3 months) temperature is between
+20 °C and +26 °C.
Guide the drill bit into the bit holder
o
Store the product in its carrying
o
case
Battery pack advice
Only store the battery pack
o
charged. The battery pack should be
charged to 40 % to 60 % (red and
orange LED in the charge indicator
light up) before storing for extended
periods.
Check the battery pack
o
about every 3 months when storing
for extended periods. Recharge as
necessary.
Transportation
Push the rotation direction switch
o
to the centre position to lock the on/off
switch
Transport the product in its carrying
o
case
Protect the product from any heavy
o
impact or strong vibrations which may
occur during transportation in vehicles.
.
6 ]
[
.
[
]
[
.
6 ]
[
.
[
]
5 ]
[
.
8 ]
[
partially
[
]
[
]
charge
]
5 ]
[
GB/IE
43