Clock Functions - JUNO JB121D5 Benutzerinformation

10
The Temperature / Time display shows the
temperature in the appliance.
2. Touch to go back to the set
temperature or the display shows it
automatically after five seconds.
Fast heat up function
Do not put food in the oven
when the Fast heat up function
operates.
The Fast heat up function is not available
with every oven function. An acoustic signal

CLOCK FUNCTIONS

Clock functions table
Clock function
COUNT UP TIMER
TIME OF DAY
DURATION
END
SET+GO
Count Up Timer
The Count Up Timer is not
activated if Duration and End are
set.
The Count Up Timer starts to count when
the appliance starts to heat.
1. To reset the Count Up Timer, touch
again and again until
display.
2. Touch until the display shows
"00:00" and the Count Up Timer starts
to count up again.
sounds if the Fast heat up function is not
available for the set function if Faulty tone is
activated in the "Settings menu".
The Fast heat up function decreases the
heat up time.
To activate the Fast heat up function touch
and hold
If you activate the Fast heat up function, the
bars on the display
operates.
Application
To set the count up, which shows how long the appliance
operates. This function has no effect on the operation of the
appliance.
To show the time of day. To change the time of day, refer to
"Setting the time".
To set how long the appliance operates.
To set when the appliance deactivates. You can use Dura-
tion and End at the same time (Time delay) if you want the
appliance to activate and deactivate automatically later.
To start the appliance with necessary settings with only one
touch of the sensor field any time later.
Setting the DURATION
1. Activate the appliance and set an oven
2. Touch
3. Use
flashes in the
4. Touch
5. Use
for more than three seconds.
comes on to show that the function
function and temperature.
again and again until the
display shows .
flashes in the display.
or to set the minutes for
DURATION.
to confirm.
or to set the hours for
DURATION.
flash one by one and