Distance Measurement With Timer; Bluetooth Connection - Ht Instruments Idm70 Bedienungsanleitung

4.13. Distance measurement with timer

The instrument allows measuring distances with timer
setting (max. 60s).
1. With the instrument in stand-by, press the
select the type of reference (see § 4.2)
2. Press the
default duration of 5s, or press and hold the
for a quick setting of the desired value, or use the
or
3. Press the
few seconds after setting the timer for measurement
to start. The instrument activates a countdown
4. In the last 2 seconds the instrument sounds loud.
Upon timer end the value is shown on the resulting
display
5. Measuring result is automatically saved in the
instrument's memory

4.14. Bluetooth connection

The instrument allows for the connection to mobile
devices such as iPhone, iPad, iPod, Android via
Bluetooth
HTLaserMeterBLE APP on the devices. To activate
connection, proceed as follows:
1. Press and hold the
symbol "Bluetooth" appears on the display
2. Connect the instrument to the mobile device via the
HTLaserMeterBLE APP
3. Upon the first connection between the instrument
and the device, a message requesting a Pin may be
shown by the device. In this case, please enter code
"0000"
4. Press and hold the
the Bluetooth function or switch off the instrument
key to enter the Timer mode with a
keys to set the desired value with 1s scan
key or the side MEAS key or wait a
connection, provided
key for 2 seconds. The
key for two seconds to quit
EN - 19
iDM70
you install
key to
key
the