Behncke Basic I Betriebsanleitung Seite 27

8 Timer
8.3 Programming
First pull all the adjusting slides forward and then push the adjusting slides corresponding to the desired
switch-on time backwards. While switched on, contact 3 - 2 is closed.
8.4 Set the time
Turn the dial clockwise until the display arrow matches the current time.
The hands will then also show the correct time.
8.5 Selector switch
3 positions:
I - Permanently on (contact 3-2 closed)
- Automatic mode
O - Permanently off (contact 3-2 open)
9 Disposal instructions
Before starting work, disconnect the control system from the power supply; the supply and discharge lines
must be closed beforehand.
The timer is equipped with a battery, the contents of which may be harmful to the environment.
Before disposing of the unit, please remove the battery and deposit it in an appropriate collection container
for recycling.
Please dispose of the remaining plastic parts according to locally applicable legal regulations.
Behncke Basic I + II / Timer
1) - Selector switch
2) - Indicator arrow
3) - Dial
4) - Adjusting slide
5) - Clock hand
6) - Transparent lid
Timer for repeating switching times every
day with captive adjusting slides for
controlling electrical devices and systems.
10