Behncke Basic I Betriebsanleitung Seite 25

5 Electrical connection
The following wiring diagram and the applicable safety regulations must be observed.
Automatic / O / On
Automatic / O / On
The total current consumption of the filter pump and heater must not exceed 4A (inductive).
There is no separate fuse protection for the filter pump and the heating unit.
DANGER!
The unit must be disconnected from the power supply before opening
the housing.
DANGER!
Risk of death due to the electric current!
The electrical connection may only be made by, and adjustment and service work
may only be carried out by, a qualified electrician (see DIN VDE 0105 Part 1)!
Generally applicable safety precautions must be observed,
e.g.: Before working on the unit, switch off the power supply and
secure it against being switched on again.
NOTE
Short-circuit protection must be ensured by suitable on-site fuses.
Behncke Basic I + II / Electrical connection
Automatic / O / On
Automatic / O / On
8