Parkside Performance PAPS 208 A1 Originalbetriebsanleitung Seite 33

Preparation
Information on the
batteries
• Switch off the device and
remove the battery from
the device before carry-
ing out any work.
• The rechargeable battery
only reaches its full ca-
pacity once it has been
charged several times.
• Charge the battery be-
fore using it for the first
time.
Checking the
battery charge level
LEDs
red, orange,
green
red, orange
red
1. Press the button (2) next
to the charge level in-
dicator button (3) on the
battery (4).
The LEDs of the charge
level indicator show how
much charge remains in
the battery.
Meaning
Battery
charged
Battery par-
tially charged
Battery
needs to be
charged
2. Charge the battery (4)
when only the red LED
on the charge level indic-
ator (3) is illuminated.
Inserting and
removing the
battery into/from
the cordless device
WARNING! Risk of in-
jury due to unintentional
start-up. Only insert the
battery into the device once
the device is fully prepared
for use.
NOTICE! Risk of damage!
An incorrect battery can
damage the device and
battery.
Inserting the battery
1. Push the battery (4)
along the guide into the
battery holder.
You will hear the battery
click into place.
Removing the battery
1. Press and hold the bat-
tery release (1) on the
battery (4).
2. Pull the battery out of the
battery holder.
GB MT
33