SKF Lincoln FlowMaster II Benutzerhandbuch Seite 3

TEL: +1 (314) 679-4200 FAX: +1 (314) 679-4367
Authorized to compile the technical file:
SKF Lubrication Systems Germany GmbH
EMAIL: robert.collins@skf.com WEBSITE:
This Declaration of Incorporation is
issued under sole responsibility of the
manufacturer. Lincoln Industrial
Corporation hereby declares that the
partly completed machinery stated
below:
Name:
FlowMaster II - Caterpillar branded
Model number(s):
434-3370 Series B, 615-2220 Series A
Description:
Rotary-driven hydraulic pump
Year of CE: 2023
in its intended use, is in conformity with
the relevant union harmonization
legislation:
Machinery Directive 2006/42/EC
(Article 13 Partly Completed
Machinery)
and conforms to the following
harmonized standards:
I, the undersigned of Lincoln Industrial Corporation, do hereby declare that the equipment specified above, in its intended use,
conforms to the requirements of the above EC Directive(s).
___________________________________
Robert Collins
Technical Compliance Manager
St. Louis, MO, U.S.A.
2023/05/14
Declaration of Incorporation
Manufacturer name/address:
Lincoln Industrial Corporation
5148 N. Hanley Road
St. Louis, MO 63134 U.S.A.
Heinrich-Hertz-Straße 2-8
69190 Walldorf, Germany
TEL: +49 (0) 6227-330
EN ISO 4413: 2010
Hydraulic fluid power - general rules
and safety requirements for systems
and their components.
EN ISO 12100: 2010
Safety of machinery. General
principles for design. Risk
assessment and risk reduction.
EN ISO 809:1998+A1:2009
Pumps and pump units for liquids -
common safety requirements.
EN 12162: 2009
Liquid pumps. Safety requirements.
Procedure for hydrostatic testing.
EN 349: 1993
Safety of machinery. Minimum gaps
to avoid crushing of parts of the
human body.
www.skf.com
The following EHSR (Essential Health
and Safety Requirements) have been
applied:
1.1.2a – 1.1.2b – 1.1.2c – 1.1.2d - 1.1.3
– 1.1.5 – 1.2.2 – 1.2.5 – 1.3.2 – 1.3.3
– 1.3.4 – 1.3.6 – 1.3.7 – 1.3.8 – 1.5.3 –
1.5.4 – 1.7.1 – 1.7.1.1 – 1.7.3 – 1.7.4
The manufacturer maintains a technical
file summary sheet containing test
reports and product documentation:
Technical file summary sheet
number: RA404581-00
The partly completed machinery shown
above should not be put into service
until the final machinery into which it is
to be incorporated has been declared in
conformity with the provisions of the
directive, where appropriate.
3
DOCUMENT NUMBER
404540.DoI