Singer 7108 Gebrauchsanweisung Seite 59

Buttons
• Pattern Selector J
e Needle Posrtior i. « «1
• Stitch Width To suH button
• Stitch ength. 0
e Needle Plate Raising Shun
• General Purpose Foot
ATTACHING A BUTTON
Fiat buttons can be sewn on by machine using
the zig-zag stitch.
e
Insert needle plate raising shim as in ­
structed on page 11.
1. Set stitch width selector at :
e
Set needle position at left
• Place button positioned on fabric under
foot and lower needle into centre of left
hole.
• ower presser foot.
• Turn hand wheel toward you until the
needle rises out of button hole and is
just above the presser foot
2 Set stitch width selector to a medii"
zig-zag setting
• Continue turning hand wheet unt. * n e
needle is above right hole, adjust sttch
width, as necessary, until neecfe enters
the centre of the right hole.
• Take six or more zig-zag shtcbes and fin ­
ish with the needle on the >eft.
3. Move stitch width selector to i and take a
few stitches to fasten threads
• Pull thread ends through to back of gar ­
ment knot close to fabric and snip off
loose ends erf thread.
57