Singer 7108 Gebrauchsanweisung Seite 57

FOUR-STEP BUTTONHO ING
(Cont ' d.)
Step 3: Side Stitching
Raise the needle above the fabric.
Turn buttonhole d al toward left to step 3.
Stitch to within a few stitches of the end of
the buttonhole (point D)
Step 4: Bar Tack
Raise the needle above the fabric.
Turn buttonhole d al toward left to step 4
Take four or five stitches (point E)
Remove the work, draw threads to the under ­
side, tie. and trim.
ADJUSTING STITCH DENSITY
BA ANCE
Differences in stitch density between the right
and left sides of the buttonhole (forward and
reverse stitching) are equalized by adjusting
the reverse stitch push button A very slight
rotation of the button will produce a noticeable
change.
• Make a test buttonhole with the push button
in neutral position (indicator dot directly be ­
low ▼ symbol).
1 If stitches on right side of the buttonhole
are too open, rotate the push button toward
right from its neutral position to increase
density of stitching.
2. If stitches on left side of the buttonhole are
too open, rotate the push button toward left
from its neutral position to increase density
of stitching.
After buttonhole stitching is completed, return
push button to its neutral position (indicator
dot directly below ▼ symbol).
55