Singer 7108 Gebrauchsanweisung Seite 55

Buttonholes
Pattern Selector
Stitch Balance Dial Neutral position
Buttonhole Foot
Always make a test buttonhole on a sample in
your fabric. Be sure to duplicate thickness of
garment and include interfacing.
if the two lines of stitching in your sample are
of unequal density refer to the next page.
Place work under buttonhole foot, align centre
marking of buttonhole A with red line on foot.
and align end marking of buttohole B with
horizontal line on foot. Do not lower the
needle.
FOUR-STEP BUTTONHO ING
Step 1: Side Stitching
Turn buttonhole dial toward right to step 1.
Position needle in fabric at point A. ower foot
and stitch to end of buttonhole (point B 1 End
marking should be aligned with horizontal line
on foot.
Step 2: Bar Tack
Raise needle above fabric by turning hand to ­
ward you.
Turn buttonhole dial toward left to step 2. Take
four or five switches (point C).
53