Cleaning, Maintenance And Storage; Cleaning; Maintenance - Parkside Performance Ppksa 40-Li B2 Originalbetriebsanleitung

Cleaning, maintenance
and storage

Cleaning

WARNING! Electric shock! Never
spray down the device with water.
WARNING! Risk of injury! Always
switch off the motor and let it cool down,
then remove the batteries before any
cleaning work.
CAUTION! Cutting injuries! Wear
cut-resistant gloves when working with the
saw chain or with the blade bar.
NOTICE! Risk of damage. Chemical sub-
stances may attack the plastic parts of the
machine. Do not use any cleaning agents
or solvents.
Clean the machine thoroughly. This will ex-
tend the life of the machine and prevent
accidents.
Cleaning after every use
• Keep the handles free of petrol, oil or
grease. If necessary, clean the handles
Machine part
Chain brake
components
Sprocket (22)
Saw chain (6)
Saw chain (6)
Action
Visual inspection, re-
place as needed
Visual inspection, re-
place as needed
Check saw chain, oil, reg-
rind or replace if necessary
Clean and oil the saw chain
with a damp cloth washed in soapy
water.
• Clean the saw chain. Do not use any li-
quids to clean the saw chain. Lightly oil
the saw chain with chain oil after clean-
ing.
• For cleaning, also remove the sprocket
cover (13) so that this area can also be
cleaned.
• Clean the blade bar (7)
• Clean the ventilation slits and the sur-
face of the machine with a paintbrush
or dry cloth.
• Clean the oil passage (34) to ensure
fault-free, automatic oiling of the saw
chain during operation. Use a brush or
a cloth to help remove residues from
the oil passage.

Maintenance

Service intervals
Carefully perform the maintenance tasks
listed in the following table on a regular
basis. Regular servicing of your device
will extend its life. Additionally, you will
achieve optimum cutting performance and
prevent accidents.
Tabelle Wartungsintervalle
Before After 10
each use
✓
✓
✓
GB MT
After
hours each use
of use
✓
55