Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• If "LED1" lights up during programming of the user fingerprints, the procedure must be
released with the "master" fingerprint again.
• Continuous flashing of "LED1" and "LED2" in sets of five signals that the data memory is
full.
• After the end of programming, the jumper must be removed from "JP1" again since the
device will remain in programming mode otherwise!
• The change from programming mode to any other operating mode takes approx. 30 sec-
onds.
40
The home technology brand for the entire house. More information at www.sygonix.com
Werbung
