Setting The Speed And Eco Mode - Parkside Performance Pptsa 20-Li B2 Originalbetriebsanleitung

GB MT
"Switching­on/off".
•­ Lower­the­plunge­saw­and­saw­for-
ward with moderate pressure – never
backward.
Reduce the risk of kickback by plac-
ing the rear edge against a stop
(e.g. the guide rail).
Moving­sideways­during­the­cut­
can cause the saw blade to jam, re-
sulting in kickback. When making plunge
cuts that are not made at right angles, se-
cure the saw table against moving side-
ways.
Sawing (with guide rail)
Right angle sawing
•­ Place­the­guide­rail­(31)­on­the­work-
piece with the black rubber lip facing
downwards.
•­ Place­the­device­with­the­groove­on­the­
guide rail.
•­ Hold­the­machine­with­both­hands,­one­
hand on the handle (6) and the second
on the auxiliary handle (1).
•­ Switch­on­the­device,­see­chapter­
"Switching­on/off".
•­ Lower­the­plunge­saw­and­saw­for-
ward with moderate pressure – never
backward.
Mitre cuts up to 45°
•­ Place­the­guide­rail­(31)­on­the­work-
piece with the black rubber lip facing
downwards.
•­ Place­the­device­with­the­groove­on­the­
guide rail.
•­ Set­the­desired­cutting­angle­as­de-
scribed in the chapter "Setting the cut-
ting­angle".
•­ Hold­the­machine­with­both­hands,­one­
40
hand on the handle (6) and the second
on the auxiliary handle (1).
•­ Switch­on­the­device,­see­chapter­
"Switching­on/off"
•­ Lower­the­plunge­saw­and­saw­for-
ward with moderate pressure – never
backward.
Plunge sawing with guide rail
•­ Place­the­guide­rail­(31)­on­the­work-
piece with the black rubber lip facing
downwards.
•­ Place­the­device­with­the­groove­on­the­
guide rail.
•­ Set­the­desired­cutting­depth­as­de-
scribed in the chapter "Setting the cut-
ting­depth".
•­ Place­the­rear­edge­of­the­saw­table­
(10) (as far as possible) against a stop.
•­ With the eccentric screws (8)
the­fitting­accuracy­of­the­saw­
table in the guide rail can be
improved.
Tighten­the­eccentric­screws­(8)­to­mini-
mise the play between the device and
the guide rail (31).
•­ Hold­the­machine­with­both­hands,­one­
hand on the handle (6) and the second
on the auxiliary handle (1).
•­ Switch­on­the­device,­see­chapter­
"Switching­on/off".
•­ Lower­the­plunge­saw­and­saw­for-
ward with moderate pressure – never
backward.
140 mm Setting the speed and
20 mm
ECO Mode
(22) button to set one of the 6
Use­the­
speed levels.
An­ECO­Mode­is­also­available.­The­ECO­
LED­indicator­ (19) ­lights­up­when­the­ECO­
Mode­is­active.