Intended Purpose; General Description; Extent Of The Delivery; Overview - Parkside Performance Pptsa 20-Li B2 Originalbetriebsanleitung

Intended purpose

The­cordless­plunge­saw­is­suitable­for­
sawing lengthwise, crosswise and ex-
change cuts in wood, plastic or light build-
ing materials (e.g. plasterboard). Sawing
of metal is not permitted.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious­danger­to­the­user.The­user­or­op-
erator is responsible for accidents causing
injury to other people or damage to prop-
erty.This­equipment­is­not­suitable­for­com-
mercial use. Commercial use will invalidate
the guarantee.
The­device­is­part­of­the­(Parkside)­
X 20 V TEAM­series­and­can­be­oper-
ated­using­(Parkside)­X 20 V TEAM­se-
ries­batteries.­The­batteries­may­only­be­
charged using chargers from the (Parkside)
X 20 V TEAM­series.

General description

An illustration of the most
important functional compo-
nents can be found on the
fold-out pages.

Extent of the delivery

Carefully unpack the appliance and check
that­it­is­complete:
- Cordless plunge saw
- Parallel guide
-­ Universal­saw­blade­Ø­140­mm­
(pre-assembled)
- Adapter for external dust extraction
- Guide rail (2-part)
+ connecting element
- 2x hex key
(1x in storage case, 1x in auxiliary handle)
- Storage case
-­ Instruction­Manual
Battery and charger are not
included.

Overview

1 Auxiliary handle
2 Locking lever
3 Switch lock
4 Shavings ejector
5 On/Off switch
6 Handle
­ 7­ Butterfly­screw
(cutting angle)
­ 8­ Eccentric­screw
9 Guide rail
10 Saw table
­ 11­ Butterfly­screw­(parallel­guide)
12 Reference mark (cutting angle)
13 Cutting angle scale
14 Adjusting knob
15 Locking mechanism
(cutting depth scale)
16 Large hex key
17 Small hex key
­ 18­ Smart­LED­display
­ 19­ ECO­LED­display
20 Charge level indicator
21 Overload warning indicator
22 Button (speed)
23 Case
24 Guard cover
25 Recess
26 Cutting width marking
27 Saw blade
28 Reference marking
(cutting depth scale)
29 Cutting depth scale
30 Parallel guide
31 Guide rails
32 Connecting element
33 Grub screws
GB MT
27