Functional Description; Technical Data - Parkside Performance Pptsa 20-Li B2 Originalbetriebsanleitung

GB MT
34 Rechargeable battery
35 Release button
36 Charger
37 Spindle lock
38 Flange
39 Screw
40 Adapter (dust extraction)
41 Parallel guide holder

Functional description

The­cordless­plunge­saw­is­suitable­for­
sawing longitudinal, cross and exchange
cuts and can be used either with or without
a guide rail. A parallel guide is included
for parallel cuts. Please refer to the descrip-
tions below for information on how the
operating elements work.

Technical data

Cordless plunge
saw ........................PPTSA 20-Li B2
Motor­voltage­U .......................... 20 V
No-load rotation speed n
Weight (without battery)................ 4.0 kg
Weight (accessories only) .............. 2.0 kg
Max.­cutting­depth,­without­guide­rail
at 90°..........................approx. 52 mm
at 45°..........................approx. 38 mm
Max.­cutting­depth,­with­guide­rail
at 90°..........................approx. 46 mm
at 45°..........................approx. 32 mm
Sound pressure level
(L ) ...................78.6 dB(A), K
pA
Sound power level
(L ) ................. 86.6 dB(A); K
WA
Vibration (a ) sawing in wood
h, W
Handle ......... 2.547 m/s
Auxiliary handle .2.917 m/s
Temperature........................... max. 50°C
Charging ............................. 4 - 40 °C
Operation ...........................-20 - 50°C
Storage ................................. 0 - 45°C
28
2800-5500 rpm
0
= 3 dB
pA
= 3 dB
WA
; K= 1.5 m/s
2 2
; K= 1.5 m/s
2 2
For use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/
Frequency band .... 2400­-­2483.5 MHz
Max.­transmission­power .......≤­20­dBm
Saw blade ..................................... HW 42
Dimensions ......Ø­140­mm­x­1.8­x­Ø­20­mm
Teeth­thickness ...........................1.8 mm
Size of borehole ..................... Ø­20­mm
Number of teeth ........................ 42 teeth
Cutting thickness ........................1.8 mm
No-load rotation speed,
n max. ................................ 7000 min
The­specified­total­vibration­value­and­the­
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The­specified­total­vibration­value­and­the­
stated­specified­noise­emission­value­can­
also be used for a provisional assessment of
the load.
Warning: The­vibration­and­noise­
emissions may deviate from the
specified­values­during­actual­use­of­the­
power tool, depending on how the power
tool is being used and, in particular, what
kind of material is being worked on.
Safety measures for the protection of the
operator are to be determined that are
based on an estimate of the actual vibra-
tion load under the real operating condi-
tions (for this, all parts of the operating
cycle are to be taken into account, for
example, times in which the electric tool
is turned off, and those during which it is
turned on but running without a load).
-1