Fronius Galvo 208-240 1.5-1 Serviceanleitung Seite 100

(5)
Installing the external fan:
(3)
100
(3) (6) (4)
Push both fan holders (5) outwards
7
and remove the external fan
NOTE! Note the air flow direction
in the device.
Snap the new external fan into the air
1
duct
Place the air duct on the rear of the in-
2
verter
Thread in the fan cable and press in
3
the seal plugs (4)
WARNING! The seal plugs must
be completely inserted in order to
ensure leak-tightness
Snap in the locks (6) for the air duct on
4
both sides
Mount air duct with 2 screws 5x14
5
TX25 (3)
[2,15 Nm | 1.58 ft lb]