Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Activate
the
Device
This device is equipped with a battery insulating film to ensure it will not be powered on during transportation before it has
shipped from the factory. When installing this product, you wi need to pul out the film before powering on and activating the
device.
o
nsulating Fi m
• 08 •
Before use,pul out the battery Insulating film from the battery compartment to power on the device.After the device is turned
on, the buzzer will beep once, the LCDbacklight will light up, and the LEDindicator will flash through 8 cyc es
(yel ow/green/red). Thedevice will then enter standby mode.
FoIlow the process below to open the battery compartment cover:
Hold the alarm with both hands and put your thumbs on both ends of the battery compartment caver.Then, push the cover
upwards with some force to remove it
e
e
• 09 •
Werbung
