Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Troubleshooting
PROBLEM
SOLUTION
Your alarm does not sound during testing.
Pleaseensure the batteries are properly installed in the alarm.
Makesure you push the test/silence button firm y.
Device
failed
to connect
to the network.
Make surethe Bluetooth on your phone is turned on when you connect the
device to the network, Readthe operation instructions in this manual careful y.
Makesure you have a 2.4GHzWi-Fi network.
When
a CO alarm occurs
or the device
is
Turn on the push notification permission on the phone.
tested, there areno app push notifications.
Checkif the device is offline and makesure your network is in good condition.
The LEDflashes yel ow once every 60
The battery is low. Replace the battery immediately.
seconds with 1 beep.
The LEDflashesye ow twice every 60
The alarm is malfunctioning. Peaseclean your alarm and seeif it is working
seconds with 2 beeps.
normal y. f not, replace the device immediately.
34 •
The LEDflashesyel ow 3 times every 60
The maximum lifetime (10years) is reached. Replace the alarm immediately
seconds with 3 beeps,
f immediate replacement is not possible,you may push the test/silence button
once to silence
Environmental
Protection
Waste electrical products should not be disposed of with househo d waste. Pleaserecyclewhere facilities exist.Check
with Local Authority or retailer for recycling advice
Manufacturer
and
Service
Information
X-Sense Innovations Co., Ltd.
Address:84 503,Kexing Science Park,15 KeyuanRoad,Shenzhen,518057,CHINA
Email:support@x sense.com
for 22 hours.
• 35 •
Werbung
