x-sense XC04-WX Bedienungsanleitung Seite 14

The battery is
replaced and
the device has
connected to
the Wi-Fi before.
Standby Mode
Alarm Mode
The LED indicator flashes 1 quick beep. Makesure the battery
blue until the Wi-Fi is properly installed
connection is successfu and the device
turned
The LED indicator tlashes None. None.
green once every 60
seconds.
A CO concentration ranging 4 quick beeps
Dangerous
from 30 to 999 ppm has
repeating every
CO concentration
been present for a certain 58 seconds.
detected, and has
time period. The blue
reached
backlight is lit, and the LED
status.The app wil
indicator flashes red 4 times
show a "CO Alarm
every 5.8 seconds.
Triggered" message,
and an app push
notification
• 24 •
is
on.
is
the alarm
will be
sent to your smartphone. Pleasereferto
"What
Sounds".
A CO concentration lev'el None. Dangerous COconcentration is
ranging from 30 to 999
detected, but has not reached the
ppm has been detected, alarm status. Potential dangerous CO
but for less than the allotted conditions
detection period. The LED
Please search for the CO source first.
indicator flashesgreen
Open nearby windows and doors, and
once every60 seconds.
immediately move to fresh air.
The LED indicator flashes Alarm
None.
green once every second concentration level drops be ow the
for 5 seconds. alarm threshold, the alarm signal will
stop. Then the device goes back to the
standby mode.
• 25 •
to Do When the CO Alarm
exist.
cancellation: when the CO